This is a demo store. No orders will be fulfilled.

12/24V 7A 160W dual circuit DC motor drive module / board H bridge L298 logic

12/24V 7A 160W dual circuit DC motor drive module / board H bridge L298 logic

DC 12V N20 Micro Metal Gear Motor Pololu 600rpm 1:50

DC 12V N20 Micro Metal Gear Motor Pololu 600rpm 1:50

DC 12V N20 Micro Metal Gear Motor Pololu 100rpm

₹400.00
Availability: In stock
SKU
ND015

Product Description:

These N20 12V 100RPM Micro Metal Gear Motor With Encoder is intended for use at 12V. Though in general, these kinds of motors can run at voltages above and below this nominal voltage; so they should comfortably operate till the 3V (rotation can start at voltages as low as 0.5 V).

Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gear motors are available in a wide range of gear ratios ROM 5:1 up to 1000:1. With the exception of 1000:1 gear ratio versions, all of the micro metal gear motors have the same physical dimensions; so one version can be easily swapped for another if your design requirements change.

Features:

1. This is a DC Mini Metal Gear Motor, ideal for making robots
2. Lightweight, high torque and low RPM
3. Fine craftsmanship, durable, not easy to wear
4. With excellent stall characteristics, can climb hills easily
5. You can also easily mount a wheel on the motors output shaft
6. Motor Size: 15 x 12 x 10 mm
7. Gearbox Length: 9 mm
8. Count: 3PPR(Pulse per Revolutions)

Specification:

1. No Load Current: 10 ma
2. No load Speed: 100 RPM
3. Rated RPM: 80
4. Rated Current (ma): 20
5. Rated Torque(kg-cm): 0.11
6. Stall Current: 0.17 A
7. Stall Torque(Kg-Cm): 1.0
8. Gear Ratio: 1:50
9. Shaft Type: D-type Single Side
10. Shaft Diameter (mm): 3
11. Weight (gm): 11
12. Screw Size: M3

More Information
UPC / EAN 46382379761
Brand CentIoT
Write Your Own Review
You're reviewing:DC 12V N20 Micro Metal Gear Motor Pololu 100rpm