This is a demo store. No orders will be fulfilled.

SCT-013-015 Non-invasive Split Core Current Transformer AC current sensor 15A

SCT-013-015 Non-invasive Split Core Current Transformer AC current sensor 15A

SCT-013-025 Non-invasive Split Core Current Transformer AC current sensor 25A

SCT-013-025 Non-invasive Split Core Current Transformer AC current sensor 25A

SCT-013-020 Non-invasive Split Core Current Transformer AC current sensor 20A

₹640.00
Availability: In stock
SKU
NB130

Product Description:

This is SCT-013-020 Non-invasive AC Current Sensor Clamp Sensor 20A. SCT-013-020 is a Non-Invasive AC current sensor i.e. it is a current transformer that can be used to measure AC current up to 100 amperes.

This non-invasive current sensor clamped around the supply line can measure a load up to 20 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect a current of up to 20A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).

Use this to build your own energy monitor and keep your power usage down, or use it to build an over-current protection device for an AC load. See the link below for an example project. Check out the data sheet for the pin out of the 3.5mm jack.

Features:

1. Non-invasive current transformer
2. Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
3. Meet UL94-V0 flame retardant properties
4. Two forms of output current, voltage (voltage output built-in the sampling resistor)
5. Non-linearity (+)/(-)3%(10%-120% rated input current)
6. Output Plug 3.5mm

Specification:

1. Core Material: Fer-rite
2. External Material: ABS
3. Input Current: 0-20A
4. Opening Size: 13*13 mm
5. Dielectric Strength(VAC/1min): 6000
6. Operating Temperature (deg C): -25 to +85
7. Output Mode: 0-1V @ 30mA
8. Cable Length: 1 Meter
9. Dimension: 57*36*21 mm
10. Weight: 65 g

More Information
UPC / EAN 46382373745
Brand CentIoT
Write Your Own Review
You're reviewing:SCT-013-020 Non-invasive Split Core Current Transformer AC current sensor 20A