This is a demo store. No orders will be fulfilled.
SCT-013-025 Non-invasive Split Core Current Transformer AC current sensor 25A
Product Description:This is SCT-013-025 Non-invasive AC Current Sensor Clamp Sensor 25A. SCT-013-025 is a Non-Invasive AC current sensor i.e. it is a current transformer that can be used to measure AC current up to 100 amperes.
This non-invasive current sensor clamped around the supply line can measure a load up to 25 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect a current of up to 25A. Simply clip it around the current source that you wish to measure and it will produce a (very) small AC voltage proportional to the current. The cable is terminated on one end with a standard 3.5mm jack (like a headphone jack).
Use this to build your own energy monitor and keep your power usage down, or use it to build an over-current protection device for an AC load. See the link below for an example project. Check out the data sheet for the pin out of the 3.5mm jack.
Features:1. Non-invasive current transformer2. Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection3. Meet UL94-V0 flame retardant properties4. Two forms of output current, voltage (voltage output built-in the sampling resistor)5. Non-linearity (+)/(-)3%(10%-120% rated input current)6. Output Plug 3.5mmSpecification:1. Core Material: Fer-rite2. External Material: ABS3. Input Current: 0-25A4. Opening Size: 13*13 mm5. Dielectric Strength(VAC/1min): 60006. Operating Temperature (deg C): -25 to +857. Output Mode: 0-1V @ 30mA8. Cable Length: 1 Meter9. Dimension: 57*36*21 mm10. Weight: 65 g
|UPC / EAN||46382373752|