Wireless switch control module

SK100 series is industry level remote wireless single switch control modules, output power range from 100MW to 5W for optional. It provides a single way signal input and a single way control  output interface, simple, reliable, and so on. Users can also be combined with a friendly PC interface  to configure the modified module's working channel in a wireless way. Making multiple  simultaneous communications will not interfere with each other and easy to use. With this module  users can easily replace the original wired environment to wireless control, thereby greatly reducing  the cost of manual wiring 

SK108 is an industrial four-channel wireless switch controller, it provides maximum four-channel signal input and maximum four-channel control output. It features a simple interface and reliable performance. The parameters can be modified by the PC software / UART command / remote controller (SK108-S). A DIP switch on the module can be used to change operating frequency (maximum 16 groups), operation mode, etc. Using this module, the user can replace the wired device with the wireless connection, which significantly reduces the cost and save much time. 

SK108H is an industrial four channels wireless switch controller with hopping function, it provides a maximum of four-channel signal input and maximum four channel control output. It features a simple interface and reliable performance. The parameters can be modified by PC software / UART command / remote controller (SK108-S). A DIP switch on the module can be used to change operating frequency (maximum 16 groups), operation mode, etc. Using this module, the user can replace a wired device with the wireless connection, which significantly reduces the cost and save much time.

SK108U includes SK108U-Tx and SK108U-Rx. SK108U-Tx is an industrial serial control transmitter, it works with  SK108U-Rx to build wireless switch control system. SK108U-TX is a serial interface which can connect with PC and  other serial devices. One SK108U-Rx has 4 channels relay output. One SK108U-Tx can control multiple  SK108U-Rx. The frequency of the SK108U-Tx and SK108U-Rx can be set to avoid frequency interference. In hardware, SK108U-Tx is the same as our SV series module, which has different output power and different interface for option. SK108U-Rx is same as SK108 in hardware but different firmware

SK109 is an industrial four channels wireless switch control module with pairing function, it provides maximum four channel signal input and maximum four channel control output. It features in simple interface and reliable performance. The parameters can be modified by PC software / UART command / remote controller (SK109-S). DIP switch on the module can used to change operating frequency (maximum 16 group), operation mode etc. Using this module, user can replace wired device with the wireless connection, which significantly reduce the cost and save much time.

SK509 is an industrial four channels wireless switch control module with pairing function, it provides maximum of four channel signal input and maximum four channel control output. It features a simple interface and reliable performance. The parameters can be modified by PC software / UART command / remote controller (SK509-S). DIPswitch on the module can be used to change operating frequency (maximum 16 groups), operation mode, etc. Using this module, the user can replace a wired device with a wireless connection, which significantly reduces the cost and save much time.